This problem is the knowledge you need to know to buy and buy terminals. Terminal maintenance is divided into daily maintenance and secondary maintenance.

1. Daily maintenance:

The punching guide rail of the terminal machine shall be lubricated with machine oil once every hour. The oil hole is on the top of the terminal machine.

Personnel handling affairs should clean the machine daily in order to remove dust and debris on the surface of the machine and any excess oil pollution;

(3) terminal machine Lord speed bearings must add butter every week, specific operation method: open the back cover to tear down the driven pulley card terminal machine spring to disconnect the pulley, beat the butter (apply high-speed bearing surface) and recovery (note: remove the pulley in the process, we should pay attention to the bearing ball is lost).

2. Secondary maintenance: if the terminal machine is used for one or two quarters, it shall check whether all parts (consumables) need to be replaced. Check whether the locking screws of the machine are loose, check whether the spring is out of shape, etc.